Push button function
Use the push button to change between programs.
When the hearing instrument is turned on it
will automatically be in program 1
Press the push button once to change to program 2.
You will hear two short beeps. For hearing instruments
equipped with a directional microphone, program 2 is
always the directional mode.
Press the push button once again to change to telecoil.
You will hear three short beeps.
If you wish to return to program 1 then press the push
button again. You will hear one short beep. Repeat this
action to cycle through the programs.
To see how your hearing instrument push button operates
with an FM system or a Direct Audio Input shoe, see
page 16. To see how your hearing instruments are pro-
grammed see page 21.
Mute function
Press the push button and hold for 2 to 3 seconds to mute
the hearing instrument. Give a short press to the push button
to unmute. The hearing instrument will revert to its current
program and will beep to tell you which program you are in.
9
To Next Page
Loading...
