Bernafon NEO - Push Button Configuration

Push button configuration
Your hearing instruments are programmed in the following
way:
❑ Omni Directional Hearing Instruments (Neo ______)
Program Beeps Function
1 1 Normal listening situations
2 2 ❑ Noise
❑ Music
❑ Car noise
Telecoil 3 ❑ Telecoil
❑ Telecoil with microphone
❑
Directional Hearing Instruments (Neo ______)
Program Beeps Function
1 1 Normal listening situations
2 2 Noise (Directional)
Telecoil 3 ❑ Telecoil only
❑ Telecoil with microphone
If your hearing instrument is connected to the Direct
Audio Input (DAI) or an FM system:
Program Beeps Function
1 2 DAI/FM + hearing
instrument microphone
2 3 DAI/FM only
3 1 Hearing instrument
microphone only
21
(1 low + 1 high)
(1 low + 2 high)