10
Telecoil function Neo 102/105/112
The telecoil enables you to hear better when using a
telephone or in places where inductive loop systems are
installed (places of worship, churches, theaters, etc.).
When the telecoil is active, you will hear directly through
the inductive loop or telephone. To access the telecoil
mode press the push button until you hear three beeps
(two pushes if you were previously in the first program).
Typically, the microphone is automatically switched off
when the telecoil is activated to reduce any background
noise. Your hearing care professional can program the
telecoil to function in combination with the microphone.
Your instrument has been programmed for:
❑ Microphone and telecoil (M+T)
❑ Telecoil only (T)
Note: Not all telephones are hearing instrument
compatible.
This symbol or a similar sign should be
displayed wherever a permanent loop has
been installed. Please ask your hearing
care professional for further information.
To Next Page
Loading...
