Bernina 2500DCET - Overlock Threading

31
Overlock threading
Upper looper (blue markings)
1
2
2
3
4
5
6
7
8
Place the spool on the spool
pin as illustrated.
1. Bring the thread up from
the spool and lay it from
the back to the front into
the guide.
2. Thread the first machine
guide.
3. Slip the thread through
the groove.
4., 5., 6., 7. Thread the
guides.
8. Thread the looper eye
and lay the thread to the
left under the presser
foot.
Note:
Do not thread the upper
looper when using the
upper looper converter.
2500_DCE_1_englisch_neu 09.10.2007 14:34 Uhr Seite 31