Threading 4 thread cover stitch (position F)
42
42
42
Place the spool on the spool
pin as illustrated.
Cover stitch looper (purple markings)
1. Bring the thread up from
the spool and lay it from
the back to the front into
the guide.
2. Thread the first guide.
3. Take the thread through
the groove.
4., 5., 6., 7., 8., Thread
guides
9. Press the lever of the
auto-threader down.
10. Thread the slit of the
threader. Push the auto-
threader lever up and it
will return to its normal
position.
11. Thread the looper eye.
Leave the thread end
(8 cm or 3“) hanging in
the machine.
To Next Page
Loading...
