63
Practical Sewing – Overlock
Seam guide right
Loosen the screw. Position the attachment (accessory bag)
over the screw and retighten the screw.
Pull out the adjustable guide to the right until it is line with
the desired marking on the looper cover.
Feed the fabric edge along the guide, an even amount of
fabric will be cut off.
To sew without cutting, push the guide to the left to line up
with the cutting line on the presser foot.
Note:
Push the guide fully to the left to open the looper
cover.
2500_DCE_2_englisch_neu 09.10.2007 15:01 Uhr Seite 63
To Next Page
Loading...
