65
Practical Sewing – Overlock
Sewing outside corners
· Snip into each corner along the stitching line.
· Sew up to the corner and slightly over the edge of the
fabric.
· Raise the needle (Needle stop).
· Raise the presser foot.
· Pull the work out at the back slightly to clear the threads
from the stitch finger.
· Turn the fabric and lay it under the presser foot so that the
cut edge of the fabric is against the knife.
· Lower the presser foot.
· Lower the needles (Needle stop down).
· If necessary, pull all the threads taut above the first machine
guide.
· Continue sewing (see 1, 2, 3).
Sewing inside corners
· Snip into the corner up to the stitching line.
· Sew until the knife reaches the cut.
· Fold fabric towards you.
· Sew over the corner.
· Fold fabric away from you.
· Continue sewing (see 4, 5, 6).
▼ 6
▲ 1
▲ 3
▲ 2
▲ 4
▲ 5
2500_DCE_2_englisch_neu 09.10.2007 15:01 Uhr Seite 65
To Next Page
Loading...
