Bernina Sewing Machine - Page 184

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
184
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Stacked Scallop Edge
(artista 730 only)
Fabric ................................................................. chamois, 8” x 12”
Stabilizer ....................................... heavyweight tear-away, 8” x 12”
Needle ................................................................ 90/14 Embroidery
Thread ................................................30 weight cotton embroidery
Presser Foot ....................................... Sideways Motion Foot #40C
Stitch ......................................................................... as indicated
Needle Position ..................................................................... center
Place stabilizer behind fabric, bonding with a light application of
HRFive spray adhesive. Fold fabric/stabilizer in half to 4” x 12”.
Mark a large + shape on the fabric as a reference/guideline.
Program the following stitches in Combi Mode:
- stitch #507, 3x
- touch Pattern Begin; the cursor moves between the first and
second scallops
- stitch #39, direction 2 - 3x between the first and second
scallop
- stitch #39, direction 14 - 3x between second & third scallop
- engage Long Stitch function for the Directional stitches only
Save the stitch combination.
Stitch from one end of the fabric to the other, guiding fabric so
that the + stays parallel and perpendicular to the presser foot.
Partially trim fabric from scallops. Note: To create edging, trim
fabric from outer edge, then apply YLI Pearl Crown Rayon to the
edge using Embroidery Foot #6 or Clear Embroidery Foot #39
and a small zigzag stitch.
Note: Some adjustments to stitch combination formulas may be
necessary depending on the fabric, thread, and stabilizer used
to create the stitch sample.