Bernina Sewing Machine - Zigzag Seam

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
32
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Fabric ........................................................... firm knit fabric 4” x 6”
Needle ................................................................... 80/12 Universal
Thread ...........................................................................all-purpose
Presser Foot ........... BERNINA
®
Reverse Pattern Foot #1 or #1C
......................................... bernette
®
Zigzag/Universal Foot
Stitch .................................................................................. zigzag
Needle Position .................................................................... center
Zigzag Seam
Cut the fabric piece in half lengthwise, creating two pieces,
2” x 6” each.
Select the Zigzag Stitch – stitch width of 1.5mm and stitch length
of approximately 1.5mm (generally between 1.4mm and 1.6mm).
Position the fabric to produce a
5
/8” seam down one side.
Stitch the seam.
Clip one seam allowance in the middle.
Press one part of the seam open and leave the other half closed
so the stitch is visible.
Trim and mount the sample.