Bernina Sewing Machine - Vari-Overlock Seam

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
36
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Fabric .......................................................... cotton interlock 4” x 6”
ribbing, 2” x 6”
Needle .................................................................... 80/12 Universal
Thread ........................................................................... all-purpose
Presser Foot ....................... BERNINA
®
Overlock Foot #2 or #2A
.................................................bernette
®
Overcasting Foot
Stitch ...................................................... vari-overlock or overlock
Needle Position ..................................................................... center
Vari-Overlock Seam
Cut an inside curve in one corner of fabric to simulate a neckline.
Select the Vari-Overlock Stitch.
If available, engage the Needle Down function.
Place folded ribbing along the curved edge of the fabric (ribbing
and fabric, right sides together).
BERNINA
®
: Guide the raw edges of the fabric under the pin of
the foot and stitch. If available, use the FHS (Free Hand System)
to maneuver the curve.
bernette
®
: Guide the fabric against the blade of the foot. Adjust
stitch length and width if needed. Adjust the fabrics as needed.
Trim the sample and mount as shown.