Bernina Sewing Machine - Page 20

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
20
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Fabric ................................................... firm, woven fabric, 4” x 6 ”
Needle ................................................................90/14 Embroidery
Thread ......................... 30 wt. cotton embroidery, contrasting color
Presser Foot ........... BERNINA
®
Reverse Pattern Foot #1 or #1C
......................................... bernette
®
Zigzag/Universal Foot
Stitch ........................................................................ zigzag stitch
Needle Position .................................................. center or far right
Zigzag/Oversewing Edges
Select the Zigzag Stitch (width = 4, length = 2).
Finish one 6” edge using the following steps.
Guide edge of fabric under the middle of the presser foot – or –
Move needle position to far right; sew using the inside edge
of the right toe as a guide.
The needle should go into the fabric on one stroke of the needle
and over the edge on the next stroke.
Do not use too long a stitch or too wide a stitch; the edge should
lie flat, not roll.
Match the weight of the thread to the weight of the fabric.
Trim and mount the sample.