Bernina Sewing Machine - Page 88

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
88
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Fabric ............................................................ firmly woven, 6” x 8”
Stabilizer ................................... firm tear-away or cut-away, 6” x 8”
Needle ..................................................................... Triple (3.0mm)
Thread ...................... Isacord embroidery thread, 3 different colors
Presser Foot .......................... BERNINA
®
Clear Foot #34/#34C or
.................... BERNINA
®
Open Embroidery Foot #20/#20C
............................................................ bernette
®
satin stitch foot
Stitch ................................................................................. straight
................................. various decorative stitches as desired
Needle Position ..................................................................... center
Triple (Drilling) Needle
Thread each needle with a different color thread. (bernette
®
use
the auxiliary spool pin and a supplementary thread stand.)
Engage the Triple Needle Limitation or Security Program,
if available..
Note: If these features are not available, check to be sure the
needles will not strike the foot by turning the handwheel to “walk”
the machine through the first stitch.
Select 5 different stitches and sew across the fabric randomly.
When doing decorative needle work you must sew slowly –
change motor to ½ speed if this option is available.
Trim threads, then trim sample edges, and mount.
Tips
Sew at a slower speed and test
the movement of the needle,
making sure that it doesn’t hit
the presser foot.
Tighten top tension to create
more dimension.