CONTROLS
14
1. First time of switching on the appliance or re-supply after power failure, the appliance always works at
settings: 41 °F (5°C) for fridge, 37°F (3°C) for My Zone and 0 °F (-18℃) for freezer. If you want to adjust the
temperature or functions manually, press any button to wake up the control panel, then any change can be
made.
2. Fridge temperature adjustment –press button D on left part of control panel to achieve different
temperatures from 34°F (1℃) to 43°F (6 ℃).
3. Freezer temperature adjustment –press button E on right part of control panel to achieve different
temperatures from 5°F (-15)℃ to -9°F (-22℃).
4. Fast Cooling function – Press button B, button illuminates and Fast Cooling function is turned on, fridge
starts to work automatically at temperature setting 34°F (1℃) and quits after 2.5 hours. Light will turn off.
5. Holiday function – Press button C, button illuminates, Holiday function is turned on and whole appliance
starts to work automatically at settings: fridge at 63°F (17℃) and freezer at 0°F (-18℃). The Fresh Zone
works at 63°F (17℃).
6. Smart function – Press button F on control panel, Smart function is turned on and button illuminates, fridge
compartment works at setting 41°F (5°C) and freezer compartment works at setting of 0°F (-18℃). The
Fresh Zone works at setting of 37°F (3°C).
7. Fast Freezing function – Press button G, button illuminates and freezer start to work at Fast Freezing
function, temperature setting -9°F (-22℃). After 6 hours, Fast Freezing function quits automatically.
8. Press button H for 3 seconds to switch off your appliance and the button illuminates, power is cut off.
Internal light stop working, compressor stops working. Press the button H for 3 seconds to switch on your
appliance, the symbol light and power is connected again.
9. Press the button A to temporarily turn the display section corresponding to the Fresh Zone, press the button
A again to adjust the temperature. Temperature ranges of fresh zone from 27°F (-3℃) to 37°F (3°C).
10. On No Frost models, there is a function: Forced Defrosting. Press the buttons D/E + H for 5 seconds to
switch on the Forced Defrostin function to clean the freezer evaporator, freezer temperature will be
displayed. Press the buttons D/E + H for 3 seconds to switch off the Forced Defrosting function, freezer
temperature will be displayed.
11. Fault Display – This appliance has ‘Fault Display & Alarm’ function. Once the sensors fault, there are
alarms displayed on the temperature displaying, the appliance still cools but a professional service engineer
should be called to check the appliance.
F1 – Sensor of fridge evaporator
F2 – Sensor of fresh zone
F3 – Sensor of fridge compartment
F4 – Sensor of freezer compartment
F5 – Sensor of freezer evaporator
2E – Fault of fan/motor in freezer
EC – Communication fault between main panel and display panel
PS: Main board locates in compressor compartment
To Next Page
Loading...
