EasyManuals Logo

Bertin Technologies PRECELLYS Evolution Touch User Manual

Bertin Technologies PRECELLYS Evolution Touch
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Page 5Page 4
PRECELLYS EVOLUTION
PRECELLYS
®
Evolution Touch
USER MANUAL
Read carefully user manual
before operating.
Lire attentivement la notice avant utilisation.
Read carefully user manual before operating.
Ne pas ouvrir le capot lors du fonctionnement.
Do not open the cover while running.
2 PRECAUTIONS AND RECOMMENDATIONS
This manual must be read carefully by the user before any use of the
PRECELLYS® Evolution Touch homogenizer.
Handling this device without following the instructions set out in this
manual could reduce the level of protection provided by the device.
In the event of non-compliance with the safety instructions set out in
this document, Bertin Technologies disclaims all liability for any resulting
damage to property or physical injury.
Contact the local distributor immediately if there is any doubt as to the
safety of the appliance.
2.1. Safety symbols
The following symbols can be found in various places on the device.
Follow the instructions associated with these symbols.
The equipment may only be repaired by personnel who have been autho-
rized by the dealer or manufacturer.
The waste resulting from normal analysis operations must be disposed of
in biological bins and treated by specialised companies.
This manual must be read carefully by the user before using the PRECELLYS®
Evolution Touch homogenizer.
1. Introduction
Thank you for purchasing a Precellys® Evolution Touch by Bertin
Technologies.
Precellys® Evolution Touch is a universal tissue homogenizer that is both
intuitive to use and eective such that it can be adapted for routine or
R&D projects.
The Precellys® Evolution Touch can homogenize a large number of
dierent samples in between a few seconds and two minutes.
It has a patented automatic tube locking system that uses a vacuum
called «Press and Block» which makes the Precellys® Evolution Touch
safe and easy to handle. Evolving in the eld of Life Sciences, the
Precellys® Evolution Touch is compatible with work environments up
to biosafety level 3 (BSL3). The instruments in the Precellys range are
used by thousands of scientists around the world. The instrument’s
unique 3D motion delivers the same high level of energy and eective
homogenization to each tube.
This manual presents all the information needed for the unpacking,
installation, routine use and maintenance of the Precellys® Evolution
Touch.
The product’s technical specications and the following information are
subject to change without notice.
Earth connection: safety of the electrical installation. By
allowing to reduce the risks of electrocution and electrication.
The sticker with the «Biohazards» symbol is delivered with the
device and must be stuck on the front of the device for use with
potentially infectious samples.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bertin Technologies PRECELLYS Evolution Touch and is the answer not in the manual?

Bertin Technologies PRECELLYS Evolution Touch Specifications

General IconGeneral
BrandBertin Technologies
ModelPRECELLYS Evolution Touch
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals