Trim Parts
5–18
40H Series Service Manual
SCREW KITS
How to order
To order screw kits, use the nomenclature shown in the example
below.
40HSK – 1 – 626 –
Series:
40HSK – Screw kits
Kit number:
1 – H, R, S, J trim screw kit
2 – M, N trim screw kit
3 – Special purpose fasteners screw kit
4 – Surface-mounted trim screw kit
5 – Visual indicator screw kit
Finish:
606 612
613 626
Options:
Thick door – Specify thickness if other than 1 3/4″
1
SH – Security head screws
1.
For door thickness information, see the table below.
The table below lists available door thicknesses. If a door’s thickness falls
between two thicknesses listed below, round up. For doors where the
mortise case is not centered in the door, contact your local dormakaba
Representative.
Available door thicknesses
2″ 3 3/4″
2 1/4″ 4″
2 1/2″ 4 1/4″
2 3/4″ 4 1/2″
3″ 4 3/4″
3 1/4″ 5″
3 1/2″
To Next Page
