Bestar 42184 - User Manual

To Next Page

MODEL

WWW.BESTAR.CA : 1-888-8BESTAR (1 888 823-7827)

42184-1132-1232-1332

Every time the bed is used, the owner should make sure that the anchors are strong and show no signs of weakening (for example if you feel that the

anchor screws are moving when pulling on the cabinet of the bed). Do not use the wall bed if the cabinet moves and do not open the bed if you are not

sure that it is rmly attached to the wall, because it could tip over causing serious injuries. When in doubt about the anchoring, please stop using the

bed immediately and have it inspected by a professional* or contact us at 1-888-823-7827.

BESTAR is released from any responsibility and will void the warranty if the installation or the anchoring is not done according to the

recommendations included in this instruction manual. BESTAR and its distributors (and their respective ocers, directors, agents and servants)

shall not be liable or obligated in any manner for any direct, punitive, exemplary, special, indirect, incidental or consequential damages of any

kind, regardless of the form of action, whether in contract, tort, negligence, strict product liability or otherwise, arising out of or in connection

with improper anchoring of the bed or non-compliance to the anchoring procedure of this document.

Be sure to conrm the following information:

1. The installer has the qualications * and required knowledge.

2. Only wall anchor screws for wood-frame walls are provided with this bed. See anchor requirements and installation notes provided

in the instruction manual, according to the type of wall, and use the appropriate anchors such as described in this manual.

3. Your bed can hold a maximum distributed weight of 1000 lb (455 kg), including the weight of the mattress.

4. Maximum thickness of mattress: 12 in (30.5 cm), and must stand in vertical position without sagging.

5. The bed will not stay open without the weight of the mattress which must be between: 60 lb (27 kg) and 90 lb (41 kg).

6. Minimum ceiling height requirements for installation: 93 in (2.36 m) with head molding, 91 po (2.31 m ) without head molding.

7. It is recommended to assess the structural integrity of the oor and wall and to make sure that the wall anchoring devices can withstand the

forces generated. More specically, before installing the wall bed, it is necessary to verify that the oor and the wall on which you want to install

the bed are at and have no structural damage that could aect the installation of the wall bed or its anchoring to the wall. Do not install the bed

on weakened or rotten structures.

8. It is necessary to ensure that wall anchors of the bed can withstand forces generated. The value of the holding power (Fh) of each anchor should

be 630 Newtons (142 lbf).

If the wall bed is not installed properly, the latter might close unexpectedly or could open involuntarily.

In addition, if the wall bed is installed incorrectly, one of its structural components may break and fall o.

* Qualied person: it is necessary to have a good understanding of the wall structure where the bed is anchored, including the positioning of the wall studs

and structural components in the case of a wood or metal structure. If you do not have the necessary skills, make sure that the installation is done by

someone who has the qualications and required knowledge. When you choose the installer, make sure to comply with all applicable regulations in the

province, state or country where the furniture is installed.

Important information to read before starting the assembly.

Keep this information for future reference.

IMPORTANT WARNINGS

Risk of serious injuries if the wall bed tips over.

To prevent wall bed from tipping over, mount it permanently to the wall.

Only a qualied person* must carry out the installation and any possible adjustment of the wall bed

(including disassembly). If the wall bed is not rmly mounted (anchored) to the wall, it might tip over

and cause serious injuries to the installer, users of the bed as well as the people near the bed.

The choice of wall anchoring depends on the type of wall. Use wall anchors suitable for the wall material.

IMPORTANT: BEFORE STARTING ASSEMBLY