Bestar Murphy 26184-4 - User Manual

http://bestar.ca
http://bestar.com
•
Bed frame maximum supporting weight: 1000 lb (455 kg).
•
Maximum mattress thickness: 12 in (30.5 cm).
•
Mattress weight must be between: 60 lb (27 kg) and 90 lb (41 kg).
•
Minimum ceiling height: 91.13 in (2.32 m).
•
Minimum holding force required for each fastener: 142 lb (630 N).
•
Not for use with folding mattress.
NOTICE
Important information to read
before starting the assembly.
Keep this information for future reference.
MODEL
COLOR
WO
26184-4
IMPACT OR CRUSHING HAZARD: If bed is not properly attached to the wall,
it can suddenly fall, resulting in serious injury or death.
•
For wood or masonry wall structure, a qualified person must install the bed to the wall.
•
For all other types, a construction professional must install the bed to the wall in compliance
with the codes and regulations in the province, state, or country where installed.
•
The choice of wall attachment screw depends on wall type. Use wall attachment screws
suitable for your wall material.
•
Verify structural integrity of floor and wall prior to installation.
•
Do not open or use the bed if the bed cabinet moves while opening, or if you notice any other
signs of loose or detaching screws.
•
Never remove wall attachment screws without first disassembling and removing the mattress
frame and lift cylinders.
•
Qualified person must have the skills and tools necessary to locate wall studs, identify type
of wall structure (wood, metal, masonry or other) and install screws correctly to wall structure.
Skills and tools include electronic stud finder, drill motor and bits, screwdriver, and ability
to correctly use these tools.
WARNING
FOR ANY PROBLEM OR INFORMATION
1-888 8BESTAR (1-888 823-7827)

Summary

Wall Anchoring Requirements and Recommendations

General Warning: Impact or Crushing Hazard

Details the severe risks associated with improper wall attachment, potentially causing falls.

Parts and Hardware Identification

Parts List

List of all furniture parts included in the package with their respective codes.

Hardware Included

Details hardware components included in various boxes for the assembly process.

Assembly Preparation and Tools

Main Hardware System Installation Steps

Overview of installation and assembly steps for the main hardware system.

Required Tools for Assembly

Lists the essential tools needed to assemble the furniture.

Cabinet Wall Anchoring Instructions

Installation for Wood Studs

Specific guidance for securely attaching the cabinet to walls with wooden studs.

Installation for Masonry Walls

Specific guidance for securely attaching the cabinet to masonry walls.

Pivot Mechanism Wall Anchoring Instructions

Fixation on Sill Plate

Instructions for anchoring the pivot mechanism to the sill plate of the wall.

Fixation on Floor

Guidance on anchoring the mechanism to the floor structure.

Disassembly Guide

Step-by-Step Disassembly Process

Procedure for safely taking apart the assembled Murphy bed.

Bestar Murphy 26184-4 Specifications

General

Brand	Bestar
Model	Murphy 26184-4
Category	Indoor Furnishing
Language	English