Bestar Murphy 85183-3 - User Manual

http://bestar.ca
http://bestar.com
•
Bed frame maximum supporting weight: 1000 lb (455 kg).
•
Maximum mattress thickness: 10 in (25.5 cm).
•
Mattress weight must be between: 60 lb (27 kg) and 90 lb (41 kg).
•
Minimum ceiling height: 85 in (2.16 m).
•
Minimum holding force required for each fastener: 142 lb (630 N).
•
Not for use with folding mattress.
NOTICE
Important information to read
before starting the assembly.
Keep this information for future reference.
MODEL
COLOR
WO
85183-3
IMPACT OR CRUSHING HAZARD: If bed is not properly attached to the wall,
it can suddenly fall, resulting in serious injury or death.
•
For wood or masonry wall structure, a qualified person must install the bed to the wall.
•
For all other types, a construction professional must install the bed to the wall in compliance
with the codes and regulations in the province, state, or country where installed.
•
The choice of wall attachment screw depends on wall type. Use wall attachment screws
suitable for your wall material.
•
Verify structural integrity of floor and wall prior to installation.
•
Do not open or use the bed if the bed cabinet moves while opening, or if you notice any other
signs of loose or detaching screws.
•
Never remove wall attachment screws without first disassembling and removing the mattress
frame and lift cylinders.
•
Qualified person must have the skills and tools necessary to locate wall studs, identify type
of wall structure (wood, metal, masonry or other) and install screws correctly to wall structure.
Skills and tools include electronic stud finder, drill motor and bits, screwdriver, and ability
to correctly use these tools.
WARNING
FOR ANY PROBLEM OR INFORMATION
1-888 8BESTAR (1-888 823-7827)

Summary

Important Information and Safety

General Safety Warnings

Crucial safety warnings for installation and use, including impact and crushing hazards.

Operational Notices

Key notices regarding weight limits, mattress specifications, and installation requirements.

Product Support and Warranty

Warranty Terms

Details Bestar's warranty policy on materials and workmanship, and conditions of use.

Customer Service and Activation

Contact information for assistance and instructions to activate the product warranty.

Product Care

Maintenance Guidelines

Tips for cleaning, protecting, and maintaining the furniture's finish.

Parts and Hardware

Component Identification

List and visual guide to all parts and hardware needed for assembly.

Assembly Instructions

Preparation and Tools

Details required tools, hardware, and initial assembly steps.

Initial Hardware Installation

First steps involving installing basic hardware components into the unit.

Bed Frame Assembly

Instructions for assembling the main structure of the bed frame.

Cylinder and Support System

Installation of gas pistons and supporting mechanisms for bed operation.

Facade and Final Adjustments

Steps for attaching decorative facades and making final operational adjustments.

Wall Anchoring

General Requirements

General requirements and safety for wall attachment, including types of anchors.

Wood Stud Mounting

Step-by-step guide for anchoring the unit securely to wood studs.

Masonry Mounting

Step-by-step guide for anchoring the unit securely to masonry walls.

Floor Anchoring

Procedures for securing the unit to the floor structure.

Disassembly Instructions

Component Removal

Steps for removing the mattress, slats, and facades.

Mechanism and Support Removal

Procedure for removing stoppers, lift cylinders, and bearing supports.

Final Wall Detachment

Instructions for unscrewing the unit from the wall and completing disassembly.

Bestar Murphy 85183-3 Specifications

General

Brand	Bestar
Model	Murphy 85183-3
Category	Indoor Furnishing
Language	English