Bestop 52406 User Manual

Installation Instructions
Retractable Sunshade
Vehicle Application: Jeep® Wrangler JK 2 Door and 4 Door
With Sunrider for Hardtop 2007-2018
Part Number 52406
P1 - 52406 Rev. A 0418
Installation Instructions - Retractable Sunshade
© 2018 Bestop, Inc.
Before you begin installing your new Retractable Sunshade,
please read all the instructions thoroughly, and watch the Bestop
Installation video. (See Support section on this page)
Do not rely in any way on the components of this product to protect
against injury or death in the event of an accident. Never operate the vehicle in excess of
manufacturer’s specications.
Read and follow, precisely, all installation instructions provided when installing this product.
Failure to do so may result in a poor t and could place occupants of the vehicle in a potentially
dangerous situation.
WEAR SEAT BELTS AT ALL TIMES
Safety glasses should be worn at all
times when installing this product.
WARNING
Installation Tips
SupportInstallation TimeTools
Skill Level
We’re here to help!
Go to www.Bestop.com and
click on “Contact Us”
1 - Easy
30 minutes
Safety
Glasses

Bestop 52406 Specifications

General

Brand	Bestop
Model	52406
Category	Automobile Accessories
Language	English

Summary

Product Components and Parts List

Included Parts

Lists the Retractable Sunshade, Mesh Blockout Panel, and Hook & Loop Strips included.

Section 1: Release Header Latches and Open Sunrider

Step 1: Release Windshield Header Latches

Release the windshield header latches on 2-Door and 4-Door Jeeps.

Step 2: Open the Sunrider

Lift and pivot the Header Assembly towards the rear of the Jeep.

Section 2: Attach Sunshade to Door Rails

Step 1: Remove Rear Mushroom Knobs

Remove the two rear mushroom knobs, leaving the front ones in place.

Step 2: Secure Sunshade to Rails

Section 3: Attach Mesh Blockout Panel

Step 1 & 2: Position and Secure Mesh Panel

Section 3: Attach Mesh Blockout Panel (cont.)

Step 3: Secure Mesh Panel to Knobs

Step 4: Apply Hook & Loop Strips

Section 3: Using the Retractable Sunshade

Step 5: Adhere Hook & Loop Strips to Shade

Step 6: Deploy and Secure Shade

Pull shade forward and secure to windshield loops using the hooks.

Product Care and Maintenance