Bestop 51252 User Manual

51252 pg 1
0410 Rev. B
TM
® Inc.
Installation Tips
Before you begin installing the Rotary Paddle
Handle Latch assembly, read all instructions
thoroughly. After completion of the project,
please keep the instruction for future reference.
This product is designed primarily to enhance the appear-
ance of the vehicle and to shield the occupants from ordinary
weather conditions. Do not rely in any way on the compo-
nents of this product to contain occupants within the vehicle,
or to protect against injury or death in the event of an
accident. This product will not protect the occupants from
falling objects. Never operate vehicle in excess of
manufacturer’s specifications.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
WARNING
Rotary Paddle Handle Latch Kit
Installation Instructions
For: Wrangler (1997-current) Part Number: 51252

Bestop 51252 Specifications

General

Color	Black Diamond
Material	Acrylic
Fitment	Direct Fit
Hardware Included	Yes
Compatible Vehicle Make	Jeep
Compatible Vehicle Model	Wrangler
Compatible Vehicle Year	1997-2006

Summary

Rotary Paddle Handle Latch Kit Installation Instructions

Important Safety Warnings

Crucial safety information and product limitations regarding vehicle use and occupant protection.

Installation Tips

Guidance for a smooth installation process and advice for future reference.

Parts and Tools

Parts List and Hardware Identification

Visual guide and list of all included components and hardware for the latch kit.

Tools Needed

List of required tools for performing the installation of the latch kit.

Pre-installation Verification

Check for correct parts and vehicle compatibility before starting installation.

Installation Procedure

Step One: Remove Old Latch Assembly

Instructions for removing the existing paddle handle latch assembly from the lower half door.

Step Two: Install New Paddle Handle Assembly

Detailed steps for fitting and securing the new paddle handle latch assembly to the door.

Limited Warranty Information