DataPro 500 Operator Guide
Operation
For example:
To set SP-1 to 123.456
1) Press the PAR key once
2) Press the SEL key to move the digit selection to the 1000ths position
3) Press RST key 6 times to increment the last digit to 6
4) Press SEL to move to the 100ths position
5) Press RST key 5 times
6) Press SEL to move to the 10ths position
7) Press RST 4 times
8) Press SEL to move to the ones position
9) Press RST key 3 times
10) Press SEL to move to the tens position
11) Press RST twice
12) Press SEL to move to the hundreds position
13) Press RST once
14) Press PAR key until the length display is shown
Part No. MAN/EN5400-0001 Page 11 of 14 Revision B (Jun 2010)
To Next Page
Loading...
Need help?
General
