DataPro 500 Operator Guide
Fuses
Fuses
The DataPro 500’s AC power entry module is shipped with two 1.5A 250V Type T or
Slo fuses, which fuse both the hot and neutral power lines. The fuse holder can hold
two ¼” x 1” or two 5mm x 20mm fuses. If a fuse is blown, it should be replaced with a
fuse of the same type.
Cleaning
Use a soft cloth moistened with water for cleaning. Abrasives or harsh detergents
may damage the plastic cover on the display and make it difficult to read.
Part No. MAN/EN5400-0001 Page 12 of 14 Revision B (Jun 2010)
To Next Page
Loading...
