EN
2
DIGITAL MULTIMETER MOD. 1760/A
1. SAFETY INFORMATION
WARNING!
To ensure safe operation, and in order to exploit to the full the functionality of the
meter, please follow the directions in this section carefully.
This multimeter has been designed according to IEC-1010 concerning electronic measuring in-
struments with an overvoltage category (CAT II) and pollution 2.
Follow all safety and operating instructions to ensure that the meter is used safely and is kept in
good operating condition.
1.1 PRELIMINARY
• When using the meter, the user must observe all normal safety rules concerning:
> protection against the dangers of electrical current
> protection of the meter against misuse
MultimetroDigitale.book Page 2 Friday, September 26, 2003 6:34 PM
To Next Page
Loading...
