EN
7
> This meter has the function of preventing the test leads from connecting wrongly. The input
socket for red test leads is arranged with proper functions and ranges, when the transform
switch can't be rotated, stop rotating. It means the selected range isn't suitable with position
of the red leads socket. Pull out the red leads and then select the range required, this provide
protection for meter to avoid damage by operation improperly.
> This meter has function of data hold.
> A rotary switch is used to select functions as well as ranges.
3. SPECIFICATIONS
Accuracy is specified for a period of year after calibration and at 18°C to 28°C (64°F to 82°F)
with relative humidity to 75%.
3.1 GENERAL SPECIFICATIONS
• It includes 30 ranges of function
• Overrange protection for all ranges
• Operating Altitude: 2000 metres (7000 ft.) maximum
• Max. Voltage between Terminals and Earth Ground: 1000V DC or AC (peak value)
• Fuse Protection: F1: 200mA /250V; F2: 10A/250V
• Display: 28 mm LCD, word is 28mm high
• Max. Show Value: 1999 (3½)
MultimetroDigitale.book Page 7 Friday, September 26, 2003 6:34 PM
To Next Page
Loading...
