Beta RR 350 EFI User Manual

1
GB
RR 350-390-430-480 EFI
Thanks for you preference, and have a good time! This hand-
book contains the information you need to properly operate and
maintain your motorcycle.
The data, specifications and images shown in this manual does not constitute
an engagement on the part of BETAMOTOR S.p.A. BETAMOTOR reserves
the right to make any changes and improvements to its models at any mo-
ment and without notice.
Code 031440270 000

Beta RR 350 EFI Specifications

General

Engine Type	Single Cylinder, 4-stroke
Compression Ratio	12.5:1
Starting System	Electric Start
Transmission	6-speed
Clutch	Wet Multi-Disc
Front Tire	90/90-21
Rear Tire	140/80-18
Bore x Stroke	88 mm x 57.4 mm
Fuel System	Electronic Fuel Injection
Rear Suspension	Monoshock
Front Brake	Disc, 260 mm
Rear Brake	Disc Brake, 240 mm
Fuel Tank Capacity	9.5 L

Summary

Beta Motorcycle Operation and Maintenance

Chapter 1 General Information

Vehicle Identification Data

Details on frame and engine identification numbers and their locations.

Tools Kit

Lists the standard tools provided with the motorcycle for operation and maintenance.

Familiarizing with the Vehicle

Overview of the motorcycle's main parts and their identification.

Specifications

Key technical data including weight, dimensions, tyres, and capacities.

Front Suspension

Technical details and specifications for the front hydraulic upside-down fork.

Rear Suspension

Specifications for the single shock absorber and its linkage.

Front Brake

Technical description of the front brake system with disc and caliper.

Rear Brake

Technical description of the rear brake system with disc and caliper.

Engine

Detailed specifications for the engine, including bore, stroke, displacement, and transmission.

Oil Recommendations

Recommended types of oil and fluids for engine, transmission, brakes, and suspension.

Chapter 2 Operation

Main Parts

Identification and description of key control levers and switches on the handlebars.

Clutch Lever

Location and function of the clutch lever on the left handlebar.

LH Switch

Details on the functions of the left-hand handlebar switchgear.

Starter Button

Location and operation of the electric starter button on the right handlebar.

Front Brake Lever and Gas Control

Location and function of the front brake lever and throttle control.

Gear Change Lever

Operation and positions of the gear shift lever on the engine.

Brake Pedal

Location and function of the rear brake pedal.

Kickstart

Procedure for using the kick-starter to start the engine.

Side Stand

Proper use and safety precautions for parking the motorcycle on the side stand.

Keys

Information on the vehicle keys, including the spare and code number.

Steering Lock

Instructions for activating and deactivating the steering lock mechanism.

Digital RPM Indicator Operating Instructions

Guide to using and setting the digital speedometer/odometer and RPM indicator.

Checks Before and After Use

Essential pre-ride and post-ride checks for safe operation and vehicle longevity.

Running In

Procedure and recommendations for the engine's break-in period.

Fuelling

Instructions and safety warnings for refueling the motorcycle with unleaded petrol.

Starting the Engine

Step-by-step guide to starting the engine using electric or kick-starter.

Engine Shut-down

Procedure for safely turning off the engine.

Vehicle Preparation for Use in Heavy-Duty Conditions

Actions to prepare the motorcycle for demanding terrain or weather like sand or mud.

Chapter 3 Adjustments

Key to Symbols

Explanation of symbols used for tightening torque and threadlocker.

Brakes

Procedures for adjusting the home position of the front brake lever and rear brake pedal.

Clutch

How to adjust the clutch lever distance from the handlebar grip.

Adjustment of Gas Clearance

Procedure for setting the correct play in the throttle control cable.

Idle Adjustment

Information on setting the engine's idle speed, warning against tampering.

Handlebar Adjustment

Methods for adjusting handlebar position by changing the U-bolt mounting.

Adjusting Fork

How to adjust the rebound and compression damping of the front telescopic fork.

Shock Absorber

Procedures for adjusting the rear shock absorber's rebound damping.

Adjusting the Hydraulic Compression Damper (High and Low Speeds)

Detailed steps for adjusting front fork compression damping for high and low speeds.

Adjusting the Spring Preload

How to adjust the spring preload on the rear shock absorber.

Static Sag Load Test

Method for measuring and verifying rear suspension sag.

Suspensions Settings According to the Weight of the Rider

Guide to setting suspension spring rates (K) based on rider weight.

Chapter 4 Checks and Maintenance

Engine Oil

Procedures for checking the oil level and replacing engine oil.

Gearbox Oil

Procedures for checking the gearbox oil level and replacement.

Liquid Coolant

How to check the coolant level and procedures for its replacement.

Air Filter

Instructions for checking and cleaning the air filter.

Spark Plug

Guide to checking the spark plug condition and replacing it.

Front Brake

Checking the fluid level, lining wear, and disc thickness of the front brake.

Front Brake Lining Control

How to check the wear condition of front brake pads.

Brake Disc Thickness Control

Procedure for checking the minimum thickness of brake discs.

Rear Brake

Checking the fluid level for the rear braking system.

Clutch Control

How to check the clutch fluid level and procedures for bleeding the clutch.

Check and Adjusting of Steering Play

Procedure for checking and adjusting play in the steering.

Oil Fork

Information on changing the oil in the front forks.

Rear Suspension Leverage

Checking tightness of nuts and bolts for optimal rear suspension operation.

Tyres

Guidelines for tyre selection, pressure, and care.

Chain

Instructions for checking and adjusting chain tension and wear.

Headlight

Maintenance of the headlight, including cleaning and bulb replacement.

Tail Light

Information on the sealed LED tail light and its replacement.

Battery

Location, maintenance, removal, and installation of the battery.

Fuses

Location and function of the vehicle's fuses and spare fuses.

Cleaning the Vehicle

Precautions and methods for safely washing the motorcycle.

Electrical Connector Maintenance

How to clean and maintain electrical connectors to prevent malfunctions.

Air Pressure and Temperature Sensor

Procedure for accessing and disconnecting the air pressure/temperature sensor connector.

Prolonged Inactivity

Steps to prepare the vehicle for long-term storage to maintain condition.

Scheduled Maintenance Vehicle

Maintenance schedule based on usage hours for various engine and chassis components.

Tightening Torque Overview

A summary of torque specifications for key components during maintenance.

Chapter 5 Removing and Installing Superstructures

Removing and Installing of the Saddle

Step-by-step guide to removing and refitting the motorcycle seat.

Removing and Installing Air Filter Cover Panel

Procedure for accessing and removing the air filter cover panel.

Removing and Installing of the Tank

Instructions for safely disconnecting fuel and electrical lines, and removing the fuel tank.

Chapter 6 Troubleshooting

Troubleshooting

Common problems with the engine, starting, and braking, with causes and remedies.