Better BT-532C - Page 30

BT-532C User manual
30
Decimal ：29 47 m
Hexadecimal ：1D 2F m
Description
Prints a downloaded bit image using the mode specified by n.
n selects a mode from the table below:
n
Mode
Vertical Dot Density
Horizontal Dot Density
0, 48
Normal
203.2 dpi
203.2 dpi
1, 49
Double-width
203.2 dpi
101.6 dpi
2, 50
Double-height
101.6 dpi
203.2 dpi
3, 51
Quadruple
101.6 dpi
101.6 dpi
Parameter range
0 ≤ m ≤ 3
48 ≤ m ≤ 51
Default
N/A
Supporting
model
All
Notes
This command is ignored if a downloaded bit image has not been defined.
In standard mode, this command is effective only when there is no data in the
print buffer.
This command has no effect in the print modes (emphasized, double-strike,
underline, character size, or white/black reverse printing), except for
upsidedown printing mode.
If the downloaded bit-image to be printed exceeds the printable area, the
excess data is not printed.
Usage example
N/A
Define NV bitmap
Name
Define NV bitmap
Format
ASCII ：FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Decimal ：28 113 n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Hexadecimal ：1C 71 n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Description
Define the NV bit image specified by n.
n specifies the number of the defined NV bit image.
xL, xH specifies (xL+xH×256)×8 dots in the horizontal direction for the NV bit