Better BT-532C - ④Tab Command

BT-532C User manual
35
This command feeds dots (for the height n of the NV bit image) in normal and
double-width modes and (for the height n×2 of the NV bit image) in
doubleheight and quadruple modes, regardless of the line spacing specified by
ESC 2 or ESC 3.
After printing the bit image, this command sets the print position to the
beginning of the line and processes the data that follows as normal data.
Usage example
N/A
④
Tab Command
JMP to the next TAB position
Name
JMP to the next TAB position
Format
ASCII ：HT
Decimal ：9
Hexadecimal ：09
Description
Moves the print position to the next horizontal tab position.
Parameter range
N/A
Default
N/A
Supporting
model
All
Notes
Horizontal tab positions are set with ESC D.
If Horizontal tab positions are not setting,this command can see as LF.
If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [printing area width+1].
Usage example
N/A
Set horizontal tab positions
Name
Set horizontal tab positions
Format
ASCII ：ESC D [d]k NUL
Decimal ：27 68 [d]k 0
Hexadecimal ：1B 44 [d]k 00
Description
Set horizontal tab positions,the meaning of the parameters as follows: