Better BT-532C - 5 Command Instruction; Command List

BT-532C User manual
6
5.Command Instruction
5.1 Command List
LF
Print and line feed
Print and line feed
command
CR
Print and carriage return
ESC J
Print and Feed n dots paper
ESC d
Print and Feed n lines
ESC 3
Set line spacing
Printing setting command
ESC 2
Select default line spacing
ESC $
Set absolute print position
GS L nL nH
Set the left blank margin with dots
ESC !
Select print mode(s)
GS ! n
Select character size
GS B n
Turn white/black reverse printing mode on/off
ESC - n
Set the underline dots(0,1,2)
ESC V n
Turn 90º clockwise rotation mode on/off
ESC a
Select justification
FS &
Select Kanji character mode
FS .
Cancel Kanji character mode
ESC % n
Select/Cancel user-defined characters
ESC &
Define user-defined characters
ESC ? n
Cancel user-defined characters
ESC R n
Select and international character set
ESC t n
Select character code table
ESC *
Graph vertical mode data filling
Bit image setting command
GS v 0
Print raster bit image
GS *
Define downloaded bit image
GS / m
Print downloaded bit image
FS q
Define NV bitmap
FS p n m
Print NV bitmap
HT
JMP to the next TAB position
Tab Command
ESC D
Set horizontal tab positions