Better BT-532C - Page 8

BT-532C User manual
8
Decimal ：13
Hexadecimal ：0A
Description
When automatic line feed is enabled, this command functions the same as LF;
when automatic line feed is disabled, this command is ignored.
Parameter range
N/A
Default
N/A
Supporting
model
All
Notes
This command line feed is ignored with a serial interface model.
Sets the print starting position to the beginning of the line.
Usage example
N/A
Print and Feed n dots paper
Name
Print and Feed n dots paper
Format
ASCII ：ESC J n
Decimal ：27 74 n
Hexadecimal ：1B 4A n
Description
Prints the data in the print buffer and feeds the paper [n×0.125 mm (0.0049”)].
Parameter range
0 ≤ n ≤ 255
Default
N/A
Supporting
model
All
Notes
After printing is completed, this command sets the print starting position to the
beginning of the line.
The paper feed amount set by this command does not affect the values set by
ESC 2 or ESC 3.
In standard mode, the printer uses the vertical motion unit (y).
Usage example
1b 40 30 31 32 1b 4a 10
Print and Feed n lines
Name
Print and Feed n lines
Format
ASCII ：ESC d n