Beurer BM 27+ - Cleaning and Maintenance; Accessories And;Or Replacement Parts

32
Average value
1. Press +.
flashes:
The average value of all this user’s saved measured values is dis
-
played.
2. Press +.
flashes:
The average value of the morning measurements for the last 7
days is displayed (morning: 5:00–9:00).
3. Press +.
flashes:
The average value of the evening measurements for the last 7
days is displayed (evening: 18:00–20:00).
Individual measured values
1. If you press + again, the last individual measurement is dis-
played.
2. If you press + again, you can view the individual measured val
-
ues.
3. Press
to switch the device o again.
Deleting measured values
1. If you want to delete the whole memory for the respective user,
press the memory button M.
2.
Now press and hold the memory button M and the setting button
SET simultaneously for 5 seconds.
7. CLEANING AND MAINTENANCE
• Clean the device and cu carefully using only a slightly damp
cloth.
• Do not use any cleaning solutions or solvents.
• Under no circumstances hold the device or cu under water,
as this can cause liquid to enter and damage the device and
cu.
• If you store the device and cu, do not place heavy objects on
the device and cu. The cu line should not be bent sharply.
• Remove the batteries if the device is not going to be used for
a long period of time.
8. ACCESSORIES AND/OR
REPLACEMENT PARTS
Accessories and/or replacement parts are available at www.
beurer.de, under “Service”. Please state the corresponding order
number.
Designation Item number and/or
order number
Universal cu (22-42 cm) 110.031
Mains part (EU) 072.78
Mains part (UK) 072.79