Why do I need to replace the Beurer Medical Equipment atomiser at regular intervals?
To guarantee a therapeutically effective particle spectrum, the nozzle holes should not exceed a certain diameter. It is also recommended to replace the atomiser on a regular basis for hygiene reasons. Replace the atomiser regularly to ensure effectiveness and hygiene.
What to do if my Beurer Medical Equipment atomiser produces little or no aerosol?
If the Beurer Medical Equipment atomiser produces little or no aerosol, first check the medicine quantity in the atomiser, ensuring it is between 2 ml and 8 ml. Also, verify that the nozzles are not blocked and clean them if necessary. Make sure the atomiser is held upright. Finally, confirm with your doctor that the medicine solution is suitable for nebulising.
Does each person need their own Beurer IH 21 Medical Equipment atomiser?
Yes, each person needs their own Beurer Medical Equipment atomiser. This is absolutely necessary for hygiene reasons.
What to do if the output of my Beurer IH 21 is too low?
If the output of your Beurer Medical Equipment is too low, check for a kinked hose or blocked filter and rectify it. Ensure that you don't have too much inhalation solution.
What to do if some inhalation solution remains in the Beurer Medical Equipment atomiser?
This is normal and occurs for technical reasons. Stop inhalation if you hear a notable difference in the noise of the Beurer Medical Equipment atomiser.
Why does inhalation with the mask take longer with Beurer IH 21?
This is for technical reasons. Less medicine is inhaled per breath through the mask holes than using the mouthpiece.
Why do I need to replace the atomiser at regular intervals in Beurer Medical Equipment?
To ensure the treatment remains effective, the size of the nozzle holes must stay within a specific range. The plastic of the Beurer Medical Equipment atomiser experiences wear from thermal and mechanical stress, especially affecting the sensitive atomiser. This wear can alter the aerosol's droplet composition, directly impacting the treatment's effectiveness. Also, for hygiene reasons, regular replacement of the atomiser is recommended.
General| Product color | Blue, White |
|---|---|
| Nebulizer technology | Jet nebulizer |
| Nebulization capacity | 0.2 ml/min |
| AC input voltage | 230 V |
| Power source type | AC |
| AC input frequency | 50 Hz |
| Adult mask | Yes |
Covers essential safety precautions before use, during operation, and for children.
Guides on removing the unit from packaging and preparing it for first use.
Explains how to correctly connect the nebuliser to the mains power supply.
Highlights hygiene, single-user policy, and rinsing the atomiser between medicines.
Explains how to fill the atomiser with saline solution or prescribed medicine.
Details the steps for preparing the nasal douche, including filling and assembly.
Explains how to start and apply the nasal douche, including breathing technique.
Details the steps for safely switching off, unplugging, and replacing the air filter.
Provides hygiene instructions and details on dismantling and cleaning atomiser parts.
Details disinfection methods for atomiser components using boiling water or vinegar solution.
Addresses causes like incorrect medicine volume, blocked nozzles, or improper atomiser position.
Details mask coverage for babies/children and supervision requirements for safe use.
To Next Page
