Beurer LB 88 - Water Tank Descaling and Storage; Descaling Water Tank; Device Storage; Replacement Parts

21
Descaling the water tank
• F ill the water tank halfway with water.
•
A dd a small quantity of descaler.
•
T ightly close the water tank using the screwed plug.
•
S hakethewatertankbyrockingitbackandforthseveraltimes.
•
E mpty the descaling solution completely.
•
R inse the base unit twice with clean, fresh water.
Storage
Ifyoudonotplantousethedeviceforarelativelylongperiodoftime,werecommendthatyouthoroughly
empty,cleananddrythedeviceandstoreitintheoriginalpackinginadryenvironment,ensuringitisnot
weighed down by additional items.
9. Replacement parts
TIP!
If the water is hard, we recommend using the optional anti-limescale filter in addition to the anti-lime pads
supplied.
Anti-limescale filter (optional)
Ordernumber162.843.Pleasecontactthenationalserviceaddress.
NOTE
• I ftheanti-limescalefilterdoesnotpreventlimescalebuild-up,orifwhite
depositsformonorinthedevice,theanti-limescalefiltershouldbereplaced.
• T heservicelifeoftheanti-limescalefilterisaroundtwotothreemonthsat
most.
•
I fthedeviceisnotusedforarelativelylongtime,theanti-limescalefiltermust
beremovedfromthewatertankanddriedout.
Fitting the anti-limescale filter
• L ift the water tank and rotate it.
•
O pen the screwed plug on the water tank.
•
S crew the anti-limescale filter onto the screwed plug on the inside.
•
T ightly seal the water tank using the screwed plug.