Beurer LB 88 - Unit Description and Initial Use; Unit Description; Initial Use Instructions

17
5. Unit description
1. Control dial
1
11
2
3
12
4
5
7
8
15
14
9
10
13
6
2. Illuminated operating loop for dis-
playing the operation
3.
Buttonforactivatingthewater
evaporation
4.
LEDdisplaywaterevaporation
level1
5.
LEDdisplaywaterevaporation
level2(if4+5,level3lightsup)
6. Waterlevelindicator
7.
Recessedgrip(whenremoving
the mist outlet)
8. Water tank
9. Base unit for air humidifier
10. Water tank screwed plug
11. Filllevelsensor
12. Air outlet
13. Aroma compartment
14. Mist outlet with two nozzles
15. Pad
Functional layout
A High-frequencyvibrationsreleasetinydropsfromthesurfaceofthe
water.
B The fan air flow transports the humid air out into the room.
C Waterevaporationcanalsobeswitchedon.
D Ifyouwish,thedevicecanbeusedwitharomas.
6. Initial use
• Open the cardboard packaging.
•  Nowremoveallplasticfilms.
•  Checkthedevice,mainsplugandcablefordamage.
Fill with water
• When filling the tank with water, disconnect the plug from the mains.
• Removethemistingoutletnozzles.
• Lift the water tank by the recessed grip and turn it upside down.
• To fill the tank, open the screwed plug underneath it.
• Nowfillthetankwithwater.Thewatertankholdsamaximumofsixlitres,andthewaterlevelisvisible
from the outside.
• Lock the water tank with the screwed plug.
• Youmaynowoptionallyinserttheanti-limepad(15)intotheevaporatorpan.Werecommenddoingsoif
youliveinahardwaterarea.
• The tank should sit tightly on the base unit.
• Check whether the misting outlet nozzle is positioned correctly on the water tank.
A
B
C
D