Beurer LB 88 - Detailed Cleaning Procedures; Cleaning Ultrasound Membrane and Base; Cleaning Water Evaporation Pan

19
• O nlyuseamildflushingagentorvinegar/vinegar-basedcleanertoperformcleaningordisinfec-
tion work.
Cleaning the ultrasound membrane with a brush, rinsing the base
NOTE
Emptythewaterfromthebaseunitviathesiderim.
• Cleantheultrasoundmembranewiththecleaningbrushprovided.
Should dirty residue remain in the base unit, pour some clean, fresh water
intothebaseunitandemptyitoutviathesideedge.
Clean the water evaporation pan
NOTE
• T heevaporationpanishotduringoperation.Allowthedevicetocoolsufficientlybeforecleaningit.
1) Hold the air outlet in one hand and turn it gently
backwards.
2) Holdtheairoutletfirmlyandremoveit.
3) Ifnecessary,removetheanti-limepad. 4) Cleanthe evaporationpanwiththecleaning
brush.
 Forheavycontamination,usea
mild cleaning product, and allow it to work together
withwaterinthepanfor10-15minutes.Thenclean
again with the cleaning brush.