english
TG 100 – Handheld Transmitter
29
3.4 Maintenance
• Protect the handheld transmitter from humidity, knocks and shock. Avoid dropping the transmitter
at all times.
• As soon as your microphone sounds dull, you should clean the integrated pop shield.
1. Unscrew the microphone grille anti-clockwise.
2. Pull out the foam pop shield, if necessary use tweezers.
3. Clean it under clear running water. If necessary, use a
mild washing-up liquid. Dry it afterwards with a hair-
dryer or allow it to dry overnight.
4. Place the dry pop shield inside the microphone grille
and replace the microphone grille by screwing it on
clockwise.
• Clean the microphone grille both inside and out with a slightly moistened cloth or a soft brush
under clear running water and allow it to dry overnight
Warning: The microphone grille cannot be cleaned in a dishwasher!
To Next Page
Loading...
