BFC VMC Series - Wiring Connections

5
HTE402559 5/47
Wire the controller and a partsfeeder or a linear feeder.
Note: See page 25 to 28 to use the Stroke sensor and Overflow sensor.
Wiring Connections
Control Panel
Case
Power Switch
Plug and Socket for Overflow Sensor
Stroke Sensor
Partsfeeder
Stroke Sensor
Linear Feeder
Plug and Socket for Stroke Sensor
Overflow Sensor
Input power is AC200 ～ 230V(200V
system), or 100～120V(100V system).
Output voltage is determined
automatically 190V at 200V system
and 95V at 100V system.