BFT ELI BT A40 - Technical Specifications

ENGLISH
TECHNICAL DATA
ELI AC A40 ELI AC A35 V ELI BT A40 ELI BT A35 V
Motor power supply 220-230 Vac 50/60 Hz 220-230 Vac 50/60 Hz 24 Vdc 24 Vdc
Length of leaf for maximum weight
Fig.N
Maximum leaf weight
Maximum motor rpm 1.400 3.000 2.100 3.400
Operator angular exit speed with control
unit without slowdown
1,03 rpm 2 rpm 1,45 rpm 2,5 rpm
Block holding: Irreversible geared motor;
compulsory electro-lock for leafs length
> 2,5 m > 2 m > 2,5 m > 2 m
Nominal power 300W 250W 180W 100W
Max. motor torque 350 Nm 250 Nm 350 Nm 200 Nm
Capacitor 10 µF 8 µF - -
Max. opening angle 120°
Min. opening angle 45°
Reaction to collision electronic clutch (with control panel)
Manual manoeuvre release key
Thermal protection 160°C self reset - -
Environmental conditions -20° / +55°C
Lubrication permanent grease
Degree of protection IP67
Actuator weight 120 N (12kg) 120 N (12kg) 100 N (10kg) 95 N (9,5kg)
* special voltage supplies on request
ELI AC A40 ELI AC A35 V ELI BT A40 ELI BT A35 V
Operating temperature range
+20°C +40°C +55°C +20°C +40°C +55°C +20°C +40°C +55°C +20°C +40°C +55°C
Cycle of use
(the cycles refer to 90° travel)
40
cycles/h
30
cycles/h
20
cycles/h
60
cycles/h
50
cycles/h
40
cycles/h
ciclo continuo 50 cycles/h
ELI BT A35 V / AC A40 - ELI AC A35 V / AC A40 - 25
D814057 0AA96_01