BFT RIGEL 5 Quick Reference

Rigel 5 v1.7 QRG
Quick reference guides are not a replacement for the supplied instructions, they are supplementary
Read and understand the installer warnings in the main instruction document first
Always apply good, safe, state of the art engineering and electrical installation principles
Safety of the completed installation is the ultimate responsibility of the installer
This product is not suitable for DIY use and should only be installed and maintained by a trained, skilled, professional installer
www.metalines.com
sales@metalines.com

BFT RIGEL 5 Specifications

General

Power Supply	230 V
Protection Rating	IP54
Control Panel	LCD
Operating Temperature	-20°C to +60°C
Inputs	Photocells, stop, opening and closing