BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 3141
Mini Grease Gun, 125 cm³
TECHNICAL DATA
Max. pressure: 207 bar (3000 psi)
Max. delivery rate: 0.4 g per stroke
Grease volume: 125 cm³
Cartridge size: 120 cm³ / 85 g
Pipe thread: M10 x 1
SPECIFICATIONS
This one-hand grease gun is suited to be filled with 400g cartridges (220 mm) or loose grease.
The grease gun is supplied with nozzle tube and coupler.
SAFETY INFORMATION
Please note the following safety notes to avoid malfunctions, damage or physical injury.
• This manual belongs to the product. It contains important notes on operating the unit. Please
pass it on along with the unit if it is handed over to a third party!
• Do not let children play with the grease gun or its packaging. Dispose of the packaging
materials carefully.
• Make sure that all parts are firmly assembled before you use the grease gun.
• Do not use force when operating the pump lever.
• Only use the supplied original accessory and change damaged accessory immediately.
• Do not disassemble the unit or attempt to repair it yourself. It does not contain parts
serviceable by you.
• Always wear safety glasses when using a grease gun.
• Keep work area clean & remove excess grease from tools, hands & clothing after use. Excess
grease, if left on floors, tools or equipment can create surfaces that become slippery.
• Do not use grease gun hose for other applications or at pressure levels above rated pressures.
COMPONENTS
1 Grease gun extension
2 Coupler
3 Piston
4 Head
5 Handle
6 Barrel
7 End cap
8 Plunger rod handle
To Next Page
Loading...
Need help?
General
