BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
INTENDED USE
This tool set is used for adjusting and checking the engine timing on e.g. following Ford models /
engines.
Fiesta 89
Fiesta 96
Puma
Focus
Escort / Orion
Mondeo 93
Mondeo 98
Mondeo 01
Galaxy I
1.25 L 16V Zetec SE
1.4 L 16V Zetec SE
1.7 L 16V Zetec SE
1.6 L 16 V Zetec SE
1.6 L 16V Zetec
1.8 L 16V Zetec
2.0 L 16V Zetec
1.6 L 16V Zetec E
1.8 L 16V Zetec E
2.0 L 16V Zetec E
1.4 L D
1.6 L TD
1.8 L TD
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com
SAFETY INFORMATIONS
• Do not use the tool if parts are missing or damaged.
• Use the tool for the intended purpose only.
• Never place the tool on the vehicle battery. There is a risk of a short circuit.
• Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
• Keep children and other unauthorized persons away from the work area.
• Do not allow children to play with the tool or its packaging.
• Be careful when working on hot engines because of the risk of burn injuries.
• If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
• This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
• After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
To Next Page
Loading...
Need help?
General
