BGS technic BGS 9992 - User Manual

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9992
Transmission Oil Filling Tool
with Hand Pump and 8 Adaptors | 7 l
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This product is designed for filling manual transmissions, automatic transmissions, differentials and
transfer cases with oil, included 8 adapter and it is suitable for e.g. Ford, BMW, Honda, Mini,
Mercedes, Nissan, VW, Audi, Porsche.
SAFETY INFORMATIONS
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Do not carry out any modifications on the tool.
• These operating instructions serve to illustrate the tools and in no way replace vehicle-specific
service literature, please refer to data and other important information on repairs.
• Vehicle-specific service literature should always be available for all tests and repairs; without
this, incorrect diagnoses and repairs cannot be ruled out.
•
Always be careful when handling oils, clean up spilled oil directly and always dispose of used oil
in an environmentally friendly manner.
SPECIFICATIONS
Tank capacity: 7L
Transfer capacity: 80ccm / Hub
Viscosity range: SAE 0 – 140

Summary

Intended Use and Safety

Intended Use

Product designed for filling manual and automatic transmissions, differentials, and transfer cases.

Safety Information

General safety guidelines including keeping children away, maintaining a clean work area, and proper oil disposal.

Product Components and Operation

Adapters

List of 8 included adapters and their vehicle compatibility, e.g., Ford, BMW, VW, Audi, Mercedes.

Operating Instructions - Step 1

Select the correct attachment and prepare the tool for oil transmission.

Operating Instructions - Step 2

Push the handle and valve to transmit oil when the vehicle's ATF is almost full.

Operating Instructions - Step 3

Close the valve when the transmission oil filling is almost finished.

Operating Instructions - Step 4

Stop pushing the handle, remove the attachment, and allow residue oil to reflux into the tank.

Environmental Protection

BGS technic BGS 9992 Specifications

General

Material	Chrome Vanadium Steel
Finish	Chrome plated
Type	Torque wrench
Accuracy	±4%
Drive	1/2 inch
Standard	DIN 3122