BGW 150 - Unpacking and Initial Setup; Container Storage and Damage Inspection; Ventilation and Mounting Position; Connection Precedence

02500
UNPACKING
AND SET-UP
Your
BGW
Power Amplifier is
shipped in an
advanced packing
container.
SAVE THE
CONTAINER
AND
ALL PACKING
MATERIAL!
The container should
be saved in
the event
the unit
is
moved
or
shipped at
some
future
date.
Replacement
containers are
available from
BGW.
Inspect
the unit for damage in
transit
immediately
upon receipt. If
damage is
found, notify
the
transportation company
immediately.
Only the
consignee may
institute
a claim with
the carrier for shipping
damage.
BGW will
cooperate fully
in
such
event. Be
sure to save
the container as
evidence of damage
for the
shipper to
inspect.
The amplifier's
mounting position must be
chosen
carefully so
that the air flow
to
the sides of
the unit is not
restricted.
Inadequate
ventilation
may cause
the
protective
heat sensors
to
shut
the
unit
off. For
rack mounting,
the four
rubber
feet on the bottom of
the unit may be
removed
and no hardware will
be
loosened
inside
the
unit.
DO
NOT PLUG THE
AMPLIFIER
IN
YET!
All
connections
should be made
before power is applied.