BGW 8000 - Page 5

00601-2
The
amplifier should be serviced by qualified service personnel when:
The power supply cord or
the plug has been damaged; or objects have
fallen into, or liquid has been spilled into the amplifier; or has been
exposed
to rain; or does not appear to operate normally or exhibits a
marked change in performance; or has been dropped, or the enclosure has
been damaged.
All connections should be made to the power amplifier with the power OFF.
Speaker fuses should be used to alford maximum speaker protection.
Never connect the output of one channel to that of another.
Connect the. power cord to the proper voltage mains as indicated on the rear of
the amplifier. Conversion to another voltage requires internal rewiring.
Do not remove the amplifier's cover. Amplifiers may not be covered under
warranty if they are tampered with. There are NO adjustments within.
Potentially lethal voltages exist within the amplifier. Refer all service work to
an authorized BGW service station.