BGW 8000 - Specifications

02303-2
Intermodula tion Distortion:
Small Signal
Frequency Response:
Hum and
Noise Level:
Input Sensitivity:
Voltage Gain:
Input Impedance:
Damping
Factor:
Output Impedance:
Power Requirement5:
Semiconductor
Complement:
Dimensions:
Weight:
SPECIFICA TIONS
Less than 0.05% from 250 milliwatts
to rated output power.
+0, -3dB, 1Hz to 100kHz,
+0, -0.25dB, 20Hz, to 20kHz.
Better than 1l0dB below 225 watts
into 8 ohms. (A weighted).
1.23 volts for
rated power output.
34.5 times.
15k ohms.
Greater than 200 to 1 at 8 ohms.
Designed for any load impedance
equal to or
greater than 2 ohms.
120 volts A.C., 60Hz at 14 amps Also
availab
le for 100, 220 or 240 volts
A.C.,50Hz.
2 Ultra-low noise matched differential
pairs, 64 transistors, 32 diodes, 6 LED's,
2 Triacs, and 5 Zener diodes.
5 1/4" by 19"
standard rack front panel.
Depth behind
front panel: 5" x 17 x 13.
(13.35 cm x 48.26 cm x 33.02 cm)
49~ Lbs., 22.50 kg shipping
43~ Lbs., 19.77 kg net