18
CONSOLE OPERATIONS
GETTING STARTED: SWITCHING FROM MPH TO KM AND VICE VERSA
1. When taking out the safety key, E-07 will appear on the screen. Press the PROGRAM
and MODE button at the same time.
2. MPH (M) and KM (KM) will appear on the screen. Choose according to preferences.
3. Release the PROGRAM and MODE buttons. e screen will light up and the E07
will once again, appear on screen.
4. Place the safety key back in the treadmill to start the machine operation.
QUICK START
1. e LCD will display the following:
Distance,Time, Speed, Calories, Heartbeat, Incline.
2. To QUICK START: Stop > Program > Press any of these buttons: Speed+, Speed-,
Incline+, Incline-, Fan, ECO, Instant speed keys button: 2/6/10M/H, and
Instant incline keys: 4,8,12%.
BUTTON DESCRIPTIONS
A. P01-P02-P03-P04-P05-P06-P07-P08-P09-P10-P11-P12-HRC-Program: When
treadmill stops, press ‘Program’ to choose ‘Manual-P01-P02-P03-P04-P05-
P06-P07-P08-P09-P10-P11-P12-HRC-Body fat’ programs in a circle.
B. Mode: please refer to below ‘body fat function’ description.
C. Stop: Stop the treadmill.
D. Speed+: While setting a program, this button will increase a setting value and
when the motor is running, it is used to increase the running speed.
E. Speed-: While setting a program, this button will decrease a setting value and
when the motor is running, it is used to decrease the running speed.
G. Incline+: Increases the incline angle
H. Incline-: Decreases the incline angle
I. Instant SPEED keys: provides an instant and easy speed change to 2/6/10M/H
J. Instant INCLINE keys: provides an instant and easy incline change to 4,8,12%.
K. Fan: turns fan o/on
L: Start: on/o ECO function.
To Next Page