Need help?Do you have a question about the Biamp SPM412e and is the answer not in the manual?
General| Brand | Biamp |
|---|---|
| Model | SPM412e |
| Category | Music Mixer |
| Language | English |
Lists the key features and capabilities of the SPM412e Stereo Preamp/Mixer.
Rotary control for adjusting the Mic Input signal level to Main and Zone outputs.
Momentary push-buttons to select stereo line input signals for Main/Zone outputs.
Rotary controls for adjusting low-frequency (Bass) and high-frequency (Treble) content.
Rotary control for adjusting the stereo balance of the Main Output signals.
Rotary control for adjusting the overall signal level sent to the Zone Output.
Push-buttons to adjust the overall signal level sent to the Main Output, including mute.
Describes the power cord, fuses, and terminals for remote control connections.
Details the balanced Main stereo and Zone mono output connectors.
Covers controls for limiting, mono summing, and bypassing tone adjustments for the Main Output.
RCA connectors for unbalanced stereo line-level inputs with individual trim controls.
Balanced input for mic/line signals, including Pad, Trim, and Phantom Power controls.
Internal jumpers to assign Mic/Line input to Main/Zone outputs, pre/post tone.
Internal jumpers to assign Stereo Line inputs to Main/Zone outputs independently.
Internal jumpers to assign muting of stereo line inputs to Main/Zone outputs.
Screwdriver adjustable controls to adjust the amount of muting applied to stereo line inputs.
Internal jumpers to assign Mic/Line input to Main Output pre or post VCA (Main Level).
Hand-held controller transmitting infrared codes to control Channel Select and Main Level.
Hard-wired control unit offering override functions and custom settings via DIP switch.
Interface for third-party controllers (AMX, CRESTRON) using serial bit-stream.
Illustrates connections for a restaurant/lounge audio system setup.
Step-by-step guide for configuring the SPM412e for a restaurant/lounge application.
Illustrates connections for a boardroom audio system setup.
Step-by-step guide for configuring the SPM412e for a boardroom application.
Illustrates the internal signal paths and functional blocks of the SPM412e.
Details frequency response, THD, noise, gain, and input/output levels.
Lists dimensions, weight, power consumption, and requirements.
Outlines the 5-year limited warranty, exclusions, and conditions.
Declares compliance with relevant EU directives and standards.
Explains WARNING/CAUTION terms and international safety symbols.
Explains safety terms and symbols across multiple languages.
Defines safety terms and symbols in multiple languages for user guidance.
Table listing hazardous substances in product components as per SJ/T11363-2006.
States environmental use period and EU RoHS compliance for the product.
To Next Page
