Biamp Tesira - Poe Injectors

Model IEEE Standard PoE Class Max Consumption Max Power From Switch
PoE Amplifiers
AMP-450P 802.3at Type 2 Class 4 25.5W 30W
AMP-450BP 802.3at Type 2 Class 4 25.5W 30W
Remote Expanders
EX-AEC 802.3at Type 2 Class 4 25.5W 30W
EX-IN 802.3at Type 2 Class 4 25.5W 30W
EX-IO 802.3at Type 2 Class 4 25.5W 30W
EX-OUT 802.3at Type 2 Class 4 25.5W 30W
EX-UBT 802.3af Class 2 6.49W 7W
Controls
EX-LOGIC 802.3af Class 1 3.84W 4W
HD-1 802.3af Class 1 3.84W 4W
TEC-1 802.3af Class 1 3.84W 4W
Parlé Microphones
TCM-1 802.3af Class 3 12.95W 15.4W
TCM-1A 802.3at Type 2 Class 4 25.5W 30W
TCM-1EX No PoE class, power via TCM-1 or TCM-1A
– –
TCM-X 802.3af Class 3 12.95W 15.4W
TCM-XA 802.3at Type 2 Class 4 25.5W 30W
TCM-XEX No PoE class, power via TCM-X or TCM-XA
– –
TTM-X 802.3af Class 3 12.95W 15.4W
TTM-XEX No PoE class, power via TTM-X
– –
PoE injectors
If planning to include just a few PoE devices in a system, consider using a non-PoE network switch with PoE injectors
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
3