2. Fix the sensor
Fix the installaon bracket on the wall with screws, then fit the groove at the
back of the sensor on the bracket. You can adjust bracket angle to achieve the
best detecon effect.
3. Mount the PIR sensor in proper angle.
It's recommended to mount it at height of 2.2m from ground, and to be
installed indoors in a corner as far as possible in order to obtain the ideal
detecon range. The sensivity is opmal when the walk direcon is vercal to
the infrared direcon. Choose the best locaon and angle according to the
actual situaon.
5.4.6 PIR Sensor Installaon Noces
Please pay aenon on below issues when installaon:
1. Avoid infrared detectors facing to glass windows or doors;
Strong light will interferes with detecon sensivity. What's more, complicated
situaon such as traffic flow,stream of people also should be avoided.
17 18
To Next Page
Loading...