bibox Firepen 3D - Leveling the Build Platform

Evobi Automations Pvt Ltd www.firepen3d.bibox.in
9
principle
：
rotate the below four nuts, the spring shrink or spread, and further control the
platform down or up.
method：move the extruder to anywhere on the platform, make sure the nozzle is close to the
platform, move normal and do not scratch the masking paper(the preminum distance
is 0.1-0.2mm)
○
1
click<Home>——<Home>
○
2
click<Set>
——
<Motor off>