Bieffe EMILIO BF089E - Trolley Mounting for EMILIO RA Plus

EMILIO
45
ENGLISH
FILL THE EMPTY CONTAINER AND PLACE IT IN ITS PLACE. THE SUPPLY PIPE MUST BE FULLY
SUBMERGED. WHEN THE SOUND ALARM IS ON, THE APPLIANCE DOES NOT WORK. THE
SAFETY SYSTEM SWITCHES OFF THE POWER SUPPLY.
To sitch on the aspirator, press the switch on the handle.
Aer the work is done, switch o all switches and disconnect the mains plug. Then wait for the
appliance to cool down and clean it.
7.2 MOUNTING OF THE TROLLEY FOR CONTAINERS (for model Emilio RA Plus)
1- Turn the steam generator upside-down. Unscrew the two screws at the base close to the big
wheels.
2- Place the trolley facing down as shown in the gure. Posion the two openings of the trolley
above the openings of the already unscrewed screws. Tighten the screws back.
3- Place the trolley propped on the wheels and ghten the trolley support rod.
FOR BEST RESULTS, WE RECOMMEND THAT THE DIRT IS SOFTENED WITH THE STEAM JET
AND THEN RESIDUES ARE ASPIRED. THE WHOLE DIRT WILL GO INTO THE INOX BODY.
1
2
1
2
3
ATTENTION: While using the as wet vacuum claner, please REMOVE the EMF lter placed
inside the steel drum. WHEN WET, THE FILTER MIGHT DAMAGE THE ENGINE. Leave the lter
inside the steel drum while using as vacuum cleaner.
If you need the machine to be always on, set the general switch on “1” to leave the ma-
chine in stand-by mode: the appliance will remain hot and in pressure, reducing electrical
consumpon.